Howto: Metal Enclousure for PedalSHIELD.

7 years 4 months ago #708 by DanielKirk2
The total should be around $25. The enclosure is $8.45, the drilling charges are about $5.50, painting is about $8.95. They drilled 4 small holes for the long, thin screws and that holds it in place. If I remember correctly, I used a couple of pieces of electrical tape as well in spots where there wasn't much clearance.

The web site says there's a $25 setup charge for custom drilling, but I don't think that applies since they have the template already. I paid this charge (and would gladly pay it again given how tight the tolerances are for this job).
The following user(s) said Thank You: Ray, BowDown

Please Log in to join the conversation.

7 years 4 months ago #709 by BowDown
Thanks a ton!

Please Log in to join the conversation.

7 years 3 months ago #755 by gmarti
Hi, i'm newbie here. :)

I am still building my Pedalshield calmly, but I am interested for a good finish enclosure.

How about you give us some photos?

Please Log in to join the conversation.

7 years 3 months ago #757 by Ray
Hi, the only pics I have apart from the other posted before in this thread are these:







There is also the possibility of doing a 3D printed version, there is another topic talking about that.
Attachments:
The following user(s) said Thank You: gmarti

Please Log in to join the conversation.

7 years 3 months ago #758 by gmarti
Thank you very much for the photos. It looks fantastic.

Please Log in to join the conversation.

7 years 3 months ago #759 by gmarti
Although I was referring to the pics of the enclosure of @rickduggan :P

Please Log in to join the conversation.

7 years 2 months ago - 7 years 2 months ago #765 by DanielKirk2
Sorry, it took a few days to get these up.

imgur.com/a/kcIv9

It very much looks like @ja_hurtado's original design. I extended the hole on the bottom to make it easier to connect a USB cable to update the device programming.

Oh, and as a reminder, the second hole on the side is my own, so don't blame the poor workmanship on Pedal Parts Plus.
The following user(s) said Thank You: Ray, gmarti

Please Log in to join the conversation.

7 years 2 months ago #768 by gmarti
Thank you @rickduggan :)

Great pics ;)

Please Log in to join the conversation.

Time to create page: 0.171 seconds
Powered by Kunena Forum
Joomla SEF URLs by Artio

Follow us

You can also follow us on:

facebook   google   instagram

pinterest   youtube   twitter